RSBW60 One Way 60mm Sealed Freewheel Clutch Bearing Backstop

RSBW60 One Way Sprag Type Freewheel Bearing Backstop Clutch

Description of RSBW60 One Way Sprag Type Freewheel Bearing Backstop Clutch

Structure: RSBW one way Bearing Backstop Clutch is a sprag type freewheel. It is self-contained, centered by plain bearings for low rotational speeds, and sealed using shield protected 0-Rings.

Application: Primarily used as backstop ,this type provides a high torque capacity with a minimum space requirement. The design allows installation in difficult environments such as high humidity or water splash areas.

Package detail: radial spherical plain bearings are delivered grease lubricated, ready to install in a vertical or horizontal position.

Catalogue of One Way Sprag type Backstop Clutch Bearing RSBW Cam Clutch

RSBW is a DC sprag type freewheel. It is self-contained, centered by plain bearings for low rotational speeds and sealed using shield protected Outer Rings.

Unit is delivered grease lubricated ready for installation in either a horizontal or vertical position.

Primarily used as a backstop, this type provides a high torque capacity with a minimum space requirement.
The design allows installation in difficult environments such as high humidity or water splash areas.

A bolt, secured to a fixed part of the machine and passing through the slot in the torque arm,

provides the rotational stop. Radial clearance on this bolt should be equal to 1-3 % of the slot width.

The torque arm and the bearings must not be prestressed.

60mm Bore One Way Clutch Bearing

60mm Sealed Freewheel Clutch Bearing

60mm One Way Clutch Bearing

RSBW60 One Way 60mm Sealed Freewheel Clutch Bearing Backstop Images